Looking for Refrigeration? Switch to

searchclose

Looking for Refrigeration? Switch to

chevron_left Products

chevron_left Air Conditioning & Heating

chevron_left Close Control Units

chevron_left Control & Supervision

chevron_left Support & Services

System's optimisation

Every application is different. So once your equipment is installed, it is always better to rely on Lennox EMEA experts to control and tune your installation setup in order to ensure a flawless start.

System's optimisation

Optimize your system for better efficiency, reliability, and performance.

System optimisation is a three-stage process that provides specialist knowledge and complements day-to-day maintenance arrangements.

1

Commissioning

A certified Lennox-trained technician will start your unit up and check your settings and components. He then performs a refrigerant leak test and validates your warranty.

2

Commissioning tuneup

After six months of operation, we recommend a Commission Tuneup in order to check your equipment’s performance in real conditions. This allows our Lennox specialist to :

  • Give realistic, personalised recommendations about maintenance schedules
  • Optimise set points and parameters for maximum efficiency under real conditions
  • Set up your system for both cooling and heating modes as seasons shift

Your Commissioning Tuneup also unlocks an additional 6 month warranty for your unit.

3

Annual performance inspection

Going further we recommend and provide an Annual Performance Inspection at your convenience with a Lennox-certified expert to ensure the best maintenance and efficiency of your equipment.

Do you need assistance?

Contact Lennox
chevron_left Support & Services

System's optimisation

Every application is different. So once your equipment is installed, it is always better to rely on Lennox EMEA experts to control and tune your installation setup in order to ensure a flawless start.

System's optimisation

Optimize your system for better efficiency, reliability, and performance.

System optimisation is a three-stage process that provides specialist knowledge and complements day-to-day maintenance arrangements.

1

Commissioning

A certified Lennox-trained technician will start your unit up and check your settings and components. He then performs a refrigerant leak test and validates your warranty.

2

Commissioning tuneup

After six months of operation, we recommend a Commission Tuneup in order to check your equipment’s performance in real conditions. This allows our Lennox specialist to :

  • Give realistic, personalised recommendations about maintenance schedules
  • Optimise set points and parameters for maximum efficiency under real conditions
  • Set up your system for both cooling and heating modes as seasons shift

Your Commissioning Tuneup also unlocks an additional 6 month warranty for your unit.

3

Annual performance inspection

Going further we recommend and provide an Annual Performance Inspection at your convenience with a Lennox-certified expert to ensure the best maintenance and efficiency of your equipment.

Do you need assistance?

Contact Lennox
chevron_left Support & Services

System's optimisation

Every application is different. So once your equipment is installed, it is always better to rely on Lennox EMEA experts to control and tune your installation setup in order to ensure a flawless start.

System's optimisation

Optimize your system for better efficiency, reliability, and performance.

System optimisation is a three-stage process that provides specialist knowledge and complements day-to-day maintenance arrangements.

1

Commissioning

A certified Lennox-trained technician will start your unit up and check your settings and components. He then performs a refrigerant leak test and validates your warranty.

2

Commissioning tuneup

After six months of operation, we recommend a Commission Tuneup in order to check your equipment’s performance in real conditions. This allows our Lennox specialist to :

  • Give realistic, personalised recommendations about maintenance schedules
  • Optimise set points and parameters for maximum efficiency under real conditions
  • Set up your system for both cooling and heating modes as seasons shift

Your Commissioning Tuneup also unlocks an additional 6 month warranty for your unit.

3

Annual performance inspection

Going further we recommend and provide an Annual Performance Inspection at your convenience with a Lennox-certified expert to ensure the best maintenance and efficiency of your equipment.

Do you need assistance?

Contact Lennox
chevron_left Support & Services

System's optimisation

Every application is different. So once your equipment is installed, it is always better to rely on Lennox EMEA experts to control and tune your installation setup in order to ensure a flawless start.

System's optimisation

Optimize your system for better efficiency, reliability, and performance.

System optimisation is a three-stage process that provides specialist knowledge and complements day-to-day maintenance arrangements.

1

Commissioning

A certified Lennox-trained technician will start your unit up and check your settings and components. He then performs a refrigerant leak test and validates your warranty.

2

Commissioning tuneup

After six months of operation, we recommend a Commission Tuneup in order to check your equipment’s performance in real conditions. This allows our Lennox specialist to :

  • Give realistic, personalised recommendations about maintenance schedules
  • Optimise set points and parameters for maximum efficiency under real conditions
  • Set up your system for both cooling and heating modes as seasons shift

Your Commissioning Tuneup also unlocks an additional 6 month warranty for your unit.

3

Annual performance inspection

Going further we recommend and provide an Annual Performance Inspection at your convenience with a Lennox-certified expert to ensure the best maintenance and efficiency of your equipment.

Do you need assistance?

Contact Lennox
chevron_left Support & Services

System's optimisation

Every application is different. So once your equipment is installed, it is always better to rely on Lennox EMEA experts to control and tune your installation setup in order to ensure a flawless start.

System's optimisation

Optimize your system for better efficiency, reliability, and performance.

System optimisation is a three-stage process that provides specialist knowledge and complements day-to-day maintenance arrangements.

1

Commissioning

A certified Lennox-trained technician will start your unit up and check your settings and components. He then performs a refrigerant leak test and validates your warranty.

2

Commissioning tuneup

After six months of operation, we recommend a Commission Tuneup in order to check your equipment’s performance in real conditions. This allows our Lennox specialist to :

  • Give realistic, personalised recommendations about maintenance schedules
  • Optimise set points and parameters for maximum efficiency under real conditions
  • Set up your system for both cooling and heating modes as seasons shift

Your Commissioning Tuneup also unlocks an additional 6 month warranty for your unit.

3

Annual performance inspection

Going further we recommend and provide an Annual Performance Inspection at your convenience with a Lennox-certified expert to ensure the best maintenance and efficiency of your equipment.

Do you need assistance?

Contact Lennox